Cortical Bone Screws 1.5mm Diameter – Self Tap Stainless Steel::
6mm – 20mm in length.
Screw diameter 1.5mm
Core diameter 1.0mm
Head diameter 3.0mm
Use the following drill bits, taps and screwdrivers:
Use 1.1mm pilot hole.
Use 1.5mm clearance hole.
Use 1.5 mm tap. (Depending on the hardness of the bone, a tap may not be needed as the thread diameter is not a lot greater than the pilot hole.)
Use 1.5mm hex head screwdriver.
