Cortical Bone Screws 2.0mm Diameter – Self Tapping Stainless Steel:
6mm – 38mm in length.
Screw diameter 2.0mm
Core diameter 1.3mm
Head diameter 4.0mm
Use the following drill bits, taps and screwdrivers:
Use 1.5mm pilot hole.
Use 2.0mm clearance hole.
Use 2.0 mm tap. (Depending on the hardness of the bone, a tap may not be needed as the thread diameter is not a lot greater than the pilot hole.)
Use 1.5mm hex head screwdriver.
